|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Origin |
Korea |
Technical Specification
| Size Range |
6" to 96" Nominal diameter |
| Class Ratings |
ASME #150 through to #2500 |
| Design Code |
ASME Section VIII Division 1
ASME Section VIII Division 2
ASME Section I |
| Closure Orientation |
Horizontal & Vertical |
| Materials |
ASME SA350 LF2
ASME SA105
ASME SA516-60
ASME SA516-70
ASME SA182-F304/304L
ASME SA182-F316/316
ASME SA240-304/304L
ASME SA240-316/316L |
| Seal Material |
NBR, HNBR, FPM(Viton), EPDM
(Other material available on request.) |
| Special Closure Finish |
316/316L Stainless Steel Overlay. |
| Options |
Safety Interlock Device
NDT Inspection
Hydro Test
Spare(Gasket, Bolt/Nut etc.)
FEA
|
LOCKING RING TYPE
 |
|
Design Features
Locking Ring Type QOC. consists of Reducer or Gear Box, Hub, Head, Locking Ring, and Self-Energized Gasket. Standard size is 20"~96", however, various sizes are available on customer's demand.
|
 |
|
Operating
After rotating the Locking Ring to the Unlock location by turning the Handle on the Gear Box or the Reducer, open the Head.
|
LOCKIGN HEAD TYPE
 |
|
Design Features
The shape is similar to Locking Ring Type without a Locking Ring, and it consists of Reducer or Gear Box, Hub, Head and Self-Energized Gasket.
Operating
After rotating the Head to the Unlock location by turning the handle on the Gear Box or the Rducer, open the Head.
|
CLAMP RING TYPE
 |
|
Design Features
Clamp Ring Type QOC. consists of single or double Handle Bolt, Hub, Head, Split Clamp Ring and Self-Gasket. Standard size is 2"~42", however, various sizes are available on customer's demand.
|
 |
|
Operating
After opening th Split Clamp Ring to the left and the right by turning the Handle Bolt, open the Head.
|
 |
|
This is application of Double Handle Bolt in which the Plug is connected to the Head.
|
SWING BOLT TYPE
 |
|
Design Features
Swing Bolt Type QOC. consists of Eye Bolt, Hub, Head and Self-Energized Gasket. Standard size is 6"~48", however, various sizes are available on customer's demand.
|
 |
|
Operating
After unlocking the Eye Bolt by turnign the Hex Nut, open the Head.
|
FORGING & MACHINING
OTHERS TYPE
 |
|
Design Features
It is usually used for small-sized nozzles of 2"~14", and design and production of various shapes are available.
|
STEAM DRUM MANHOLE
 |
|
Design Features
As Manholes used for high-temperature and high-pressure Steam Drums, desing and production of various shapes are available.
|
SPECIAL OPERATION
 |
|
Electric Automatic Operating
It consists of Electric Motor, Gear Box, Junction Box and Control Panel.
Pneumatic Automatic Operating
It consists of Motor, Gear Box, Control Panel and Control Valve.
Hydraulic Automatic Operating
It consists of Hydraulic Motor, Hydraulic Pump and Control Panel.
|
 |
 |
 |
| EXPLOSION PROOF PANEL |
LOCAL CONTROL PANEL |
HYDRAULIC POWER UNIT |
OPERATING SEQUENCE
 |
 |
| 1. Check whether isolated, drained and vented completely from all pressures before trying to open up the Closure. |
2. Attach the Ratchet Handle to the Gear Box after all the safety inspection for opening up the Closure is completed. Activate the Ratchet Handle and circulate the Locking Ring up to the Open location |
 |
 |
| Check whether the Locking Ring moves up to the Open locating |
Use the Door Handle to circulate up to the location in which the door is opened. |
3D MODELING SIMULATION
 |
 |
| CLAMP RING TYPE |
LOCKING RING TYPE |
FATIGUE ANALYSIS
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page